US | en
Shopping Cart

Flashsetter

Since mid 2016 your QLOCKTWO is even easier to set with the QLOCKTWO FLASHSETTER. After having installed the FLASHSETTER on your smartphone, the current time of your smartphone will be transmitted to your QLOCKTWO in no time by pressing the “FLASH”-button.

FLASHSETTER App iPhone
FLASHSETTER App Android

* Optimised for iPhone iOS 9 or higher and Android Version 4.0 or higher. The app can normally be used on most common Android smartphones released after 2014. The screen brightness should be set to maximum level.

QLOCKTWO CLASSIC

Wall

QLOCKTWO FLASHSETTER

iPhone: Hold your phone, as shown on the illustration, approx. 3 cm above your QLOCKTWO CLASSIC, in order to get the light to the rear side. Then press the FLASH-button for a few seconds to transmit the time.

QLOCKTWO FLASHSETTER

Android: Press the FLASH-button. Direct the flashing screen towards the clock. Then transmit the time by holding your phone, as shown on the illustration, for approximately 10 seconds closely above the light sensor on the rear side of your QLOCKTWO CLASSIC whilst touching it down to the wall mount.

QLOCKTWO CLASSIC

Stand

QLOCKTWO CLASSIC Illustration FLASHSETTER

iPhone: Hold your phone, as shown on the illustration, closely above the light sensor on the rear side of your QLOCKTWO CLASSIC. Then press the FLASH-button for a few seconds to transmit the time.

QLOCKTWO CLASSIC Illustration FLASHSETTER

Android: Press the FLASH-button. Direct the flashing screen towards the clock. Then transmit the time by holding your phone, as shown on the illustration, closely above the light sensor on the rear side of your QLOCKTWO CLASSIC.

QLOCKTWO LARGE / QLOCKTWO 180

QLOCKTWO FLASHSETTER

iPhone: Hold your phone, as shown on the illustration, closely above the logo of your QLOCKTWO LARGE (QLOCKTWO 180). Then press the FLASH-button for a few seconds to transmit the time.

QLOCKTWO FLASHSETTER

Android: Press the FLASH-button. Direct the flashing screen towards the clock. Then transmit the time by holding your phone closely above the logo of your QLOCKTWO LARGE (QLOCKTWO 180).

QLOCKTWO TOUCH

QLOCKTWO FLASHSETTER

iPhone: Hold your phone, as shown on the illustration, closely above the light sensor on the rear side of your QLOCKTWO TOUCH. Then press the FLASH-button for a few seconds to transmit the time.

QLOCKTWO FLASHSETTER

Android: Press the FLASH-button. Direct the flashing screen towards the clock. Then transmit the time by holding your phone, as shown on the illustration, closely above the light sensor on the rear side of your QLOCKTWO TOUCH.